- ABOUT US
- CASE STUDIES
Clement EB24 windows have been created for fenestration projects where a traditional steel window appearance is required, replicating the appearance of original or existing windows while simultaneously providing all the advantages of 21st century technology.
EB24 windows are manufactured with exceptionally slim frames. The 24mm insulated glass units mean that the largest possible glazed area is provided, thereby optimising solar gain and saving energy through reduced use of artificial lighting.
Our most versatile and popular product, EB24 windows are appropriate for both refurbishment and new build projects.
EB24 windows comply with Part L of UK Building Regulations (April 2021), and meet an Window Energy Rating (WER) of "B" or “C”.
Made to suit your individual requirements EB24 windows are generally manufactured in accordance with BS 6510:2010 specifications for hot rolled steel windows. The mild steel sections used for Clement window and door frames are precision rolled in Switzerland using recycled steel to suit Clement’s unique profiles and tolerances. All frames and ancillary profiles are hot dip galvanised to BS EN ISO 1461 and available with a factory applied polyester powder coating to BS EN ISO 13438 from the RAL colour range, exceeding the minimum paint thickness over the zinc of 60 microns.
Frames are manufactured from hot rolled mild steel profiles with corner joints mitred, welded and dressed square and flat. Small panes can be formed with T glazing bars whose ends are tenon riveted and/or welded to the frame and cross joints are interlocked and welded with rigid joints. Composite windows can be assembled by connecting windows horizontally and/or vertically with mullions and/or transoms of hot rolled slim steel profiles. Box sections are available as tubes or as box mullions which can be either hot rolled or manufactured from sheet steel. Pressed metal cills are available in a choice of profiles. Trickle vents can be fitted in accordance with Part F of the Building Regulations.
The EB24 range of windows is available with multi point locking to PAS 24 or traditional single point locking and other security devices if required.
EB24 windows can be fitted into timber subframes, or direct to brickwork, concrete or stone. Windows are installed using fixing lugs or direct fixing stainless steel screws.
EB24 can be supplied if required with various glazing options, from both inside or outside including:
Combinations of fixed lights, top hung, side hung and bottom hung windows are available as well as single and double doors in both ‘open in’ and ‘open out’ configurations.
EB24 windows are double glazed with high performance 24mm insulating glass units. The specification includes the latest glazing technology, a 4mm inner pane, 16mm cavity with argon gas fill and a 4mm outer pane. This configuration achieves a superb performance with a centre pane “U” value of 1.2W/m²K. The panes are joined using special Warm Edge spacers.
In accordance with Glass & Glazing Federation best practice, Clement steel windows are factory glazed, however, our concealed fixings mean that fixed light windows need to be glazed on site after the frames have been installed. Glazing beads are made of aluminium or glass reinforced plastic (GRP).
EB24 windows can be supplied shaped, with shaped heads, and ‘curved on plan’.
Windows (both individual and composite panels) and doors are made to measure. Individual window and door sizes can be supplied within the limits shown in the table below. Sizes outside these limits may be considered after consultation with one of our sales consultants.
Nominal profile width: 36mm
Fixed lights: < 36mm
Opening casement frame: < 36mm
Opening casement and mullion: < 51mm
Sealant or glasket width is 2mm, thus the overall typical sight line for fixed light (perimeter) frame, inclusive of sealants, is 38mm.
|WINDOWS||Min (mm)||Max (mm)||Min (mm)||Max (mm)||Max (mm)|
The combination of width and height is to be such that the window perimeter does not exceed the maximum in the table, and that the ratio of lesser to greater dimension does not exceed 1:8 when using 4mm glass.
EB24 side hung vents when tested achieved the following results:
Air permeability: Class 4
Water tightness: E900
Resistance to wind: C5
In accordance with approved Document Q we can achieve PAS24:2016 on side hung vents, top hung vents, single and double doors when using our multi point locking systems.
We offer five different styles of glazing, from clear glass, to genuine lead in an arrangement to match the pattern of your original leaded lights, to the G+ and Fenestra joint systems which are unique to Clement. All of these options have superb features which faithfully replicate those of original steel windows.
Our steel windows are hot dip galvanized and available in a choice of highly durable Akzo Nobel powder paint colours. Clement Windows provide an average paint coating in excess of 100 microns on flat surfaces – the industry standard calls for 60/70 microns. Order from a wide range of RAL colours to match your scheme or choose different colours for the inside and outside of your windows.
Browse a select range of accessories which perfectly complement our stunning steel windows, doors and screens. Carefully crafted in a number of different styles and available in a choice of colours and finishes, our range of handles and other fittings are made from the finest quality materials and manufactured with the latest technology in mind.